Pace and Cap  - Sartin Methodology & The Match Up

Pace and Cap - Sartin Methodology & The Match Up (http://paceandcap.com/forums/index.php)
-   General Discussion (http://paceandcap.com/forums/forumdisplay.php?f=5)
-   -   RDSS 2.1 Update (http://paceandcap.com/forums/showthread.php?t=12221)

Ted Craven 04-15-2019 02:29 PM

RDSS 2.1 Update
 
It's Monday so that means TwinSpires (TS) website changes have 'broken' yet another link used internally by RDSS Version 2.1.048-a (the current public version). :(

If you are using this version, you will likely notice frequent '(not responding)' messages while RDSS periodically checks a TS page for something or other and cannot connect, stalling for a 'time-out' period of several seconds.

I have duplicated this problem. Unless this magically goes away later today, I will assume that this version of RDSS is finally 'broken', as it started to breakdown in early March by not being able to access the tote board.

I have been testing an update which has resolved all these problems, and does not experience the 'not responding' problem from today. it has not been ready to release due to some other bugs and a small list of things I wanted to include before releasing a wide-spread update.

I will now accelerate my work on this update and attempt to release it in the next few days, even if I have to update it yet further in the next month or so.

I am sorry for this new problem and will work as fast as I can to fix it.

Ted

Lt1 04-15-2019 02:43 PM

Version v also having tote board problem.
Tim

brixdude 04-15-2019 02:47 PM

Can we revert to a previous version that does work?

Ted Craven 04-15-2019 03:10 PM

Quote:

Originally Posted by Lt1 (Post 120760)
Version v also having tote board problem.
Tim


Really Tim? I hooked up 3 people this morning with Version -V and it worked instantly for all of them, tote and all. Could you retry it please. Please email me with Windows version particulars.


Anyone else testing Version -V and also having tote or 'not responding' problems?


That -V version is my base version for an update, hopefully next few days. Everything has been working pretty well for the past several weeks testing, particularly tote.



Ted

Ted Craven 04-15-2019 03:12 PM

Quote:

Originally Posted by brixdude (Post 120761)
Can we revert to a previous version that does work?


I'd really prefer not putting the time into figuring out which old versions are unaffected so you could revert to them, versus spending the same time getting the next one out, since I'm so close.


Ted

Lt1 04-15-2019 03:36 PM

OK Ted. Will let you know in a few
Tim

Ted Craven 04-15-2019 09:50 PM

I have sent an RDSS update to test to a few people in the Testing Group and hope to release it generally by Wednesday. If you did not receive an email from me about this and would like to test it in the next 24-48 hours, please email or PM me.

I'm sure there are a few things I can tweak with feedback, but some things I had hoped to include in the next update are NOT included in this update being tested. After this quick 'emergency fix', I plan to release another update by the end of April.

This update fixes the 'not responding' stalling problem discussed in this thread and fixes tote data flow in general.

Ted

Ted Craven 04-17-2019 11:30 AM

I expect to have an update to RDSS 2.1 either tonight or tomorrow morning.

I'm testing the changes and feedback from those who are testing the candidate update. I'll make a post here and send an email to all RDSS users.

Ted

mick 04-17-2019 01:20 PM

Run as Administrator
 
After installation of the new version, I would suggest that you run RDSS2 as the administrator the first time. It's easy to do. Right-click on the RDSS2 icon and select "Run as Administrator." That's all.

BTW the new version I'm beta-testing works fine.

Chazz 04-18-2019 09:45 AM

Ted,
Please send me the fix for not responding, when you have it
Chazz

Ted Craven 04-18-2019 10:43 AM

Folks, I have made public the interim testing version of RDSS 2.1.049.11 which you can download from the usual RDSS Download page (via the RDSS Icon upper-right corner of the website). Or here: http://www.rdss2.com/download-software

This has been tested by a number of users over the past 3 days and found to repair the 'not responding' and sluggishness issues recently reported by many. It also fully reinstates tote data retrieval from TwinSpires which disappeared a month ago, along with Profit Line and BRIS Prime Power ratings.

This is not the final version I had intended to release today, but I ran into several issues while adding the final things I wanted and felt I could not delay any further. This version is good enough and better than what the majority of people are currently using.

I will advise everyone when the next update is available (very soon) and will update all the documentation in the RDSS 2.1 Documentation Thread.

One interim piece of advice on running this version (and future versions of RDSS) - per Mick's advice above, I highly recommend always running RDSS as an Administrator (this gains elevated permissions within Windows and may prevent various security complaints by the Windows security system).

To Run as Administrator, right-click on the RDSS Desktop Icon (or on the RDSS2.EXE application file in the RDSS2.1 Folder), choose Properties, then the Compatibility Tab, then in the Settings section, check the 'Run this program as an administrator' box. Click Apply, then OK.

Thanks to all the testers who volunteered to help me out getting this version ready for everyone!


Ted

Ted Craven 04-18-2019 10:51 AM

There are several Bugs from the previous version which are not yet addressed in this temporary update. I will document additions and things outstanding and immanently to be fixed in the next short while, in addition to yet another update.

Meanwhile, as usual, please report any Bugs or complaints in the RDSS 2.1 Bugs Thread, or Suggestions in the Suggestions Box.

Thanks!

Ted

Ted Craven 04-18-2019 02:12 PM

It has come to my attention that if you have assembled races under a previous version of RDSS, they might not always display or sort correctly when you update versions and open a previously assembled race.

If readouts look off, on the Card Summary screen, right-click an individual race to re-assemble it. Or clear the Cache of all assembled races (use the Clear Cache button) then click the Assemble All Races button.

I have not seen this myself, but some have reported it. When in doubt, re-assemble.

Ted

clore1030 04-19-2019 12:38 PM

I could use an update also. I checked my email, last RDSS- sourced message was in August.

Never mind, I think that I have it going now.

Ted Craven 04-19-2019 01:20 PM

Charles, please just help yourself to the current update V2.1.049.11, here: http://www.rdss2.com/download-software

I will send an email when the NEXT update is available hopefully in a few days.


A reminder - if you have assembled any races in a previous version, please reassemble them when you install the update.


Ted

Ted Craven 04-19-2019 01:58 PM

Everyone - please place comments, questions re possible Bugs/Problems about the new V2.1.049.11 in the Bugs thread here (http://paceandcap.com/forums/showthread.php?t=10575).

A reminder - I intend to update RDSS once again as soon as possible, after I can resolve a few more issues. This current update is just to get users back in business after the serious 'not responding' issue affecting the previous V2.1.048-a version. Then I will send an email to everyone.

Thanks!

Ted


All times are GMT -4. The time now is 06:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.