Pace and Cap  - Sartin Methodology & The Match Up

Pace and Cap - Sartin Methodology & The Match Up (http://paceandcap.com/forums/index.php)
-   General Discussion (http://paceandcap.com/forums/forumdisplay.php?f=5)
-   -   RDSS / TwinSpires Problem Again! (http://paceandcap.com/forums/showthread.php?t=16106)

Ted Craven 10-02-2023 02:16 PM

RDSS / TwinSpires Problem Again!
 
This morning it looks like RDSS is not able to connect to TwinSpires to get TS Ratings, Tote, Scratches or Mutuel results. RDSS appears to stall, with Windows giving a '(not responding)' message while RDSS waits to hear from the TwinSpires site.

The quick solution is to start RDSS, wait 60 seconds (count to 60) for RDSS to regain control, then immediately go to the Configure Screen and UNCHECK both the Tote/Scratches and TS Ratings boxes, Save, then restart RDSS. RDSS will resume normal operations but without that data.

For those of you wanting the TS Ratings (Prime Power and ProfitLine), you can get these manually from TwinSpires by clicking on the TwinSpires button on the RDSS Desktop.


Please read the rest of this thread for further information. I will issue an update to finally solve this as soon as I can (expect January).


Ted

Ted Craven 10-02-2023 02:24 PM

Quote:

Originally Posted by ginag2 (Post 152503)
Ted -

Quote:

Originally Posted by ginag2 (Post 152503)

Can't get through to the Configure tab to try and elim Twin Spires data access - after hour-glass spinning for about a minute - it simply goes back to the page from which I tried to access Configure. - Gary

Most people I've corresponded with this morning are able to at least load RDSS to get to the Configure Tab to make the changes I advised. However, if you cannot load up RDSS to the main Desktop screen, close RDSS then go to the Configure file and make the changes there, outside RDSS.

The file is located here (use your Windows File Explorer): c:\Rdss22\Configure\Configure.ini. Open this file in a text editor by double-clicking it. Search for the following terms (found within the [General] section):


//Tote/Scratch Retrieval: ON=1 OFF=0
Tote_enabled=0

//TS Ratings/Scratch Retrieval: ON=1 OFF=0
TS_ratings_enabled=0


If the value following the = sign is a 1, change them both to a 0 (i.e. OFF).

Save the file, close it, then restart RDSS.


Note: if your Configure file does not HAVE these 2 terms (an older/long-standing Configure file setup), you will have to add them. With the Configure.ini file open, look for the line reading [General]. On a line AFTER that line (i.e. within the General Settings group) add the 2 lines above (e.g. copy and paste the lines above to your Configure file).


Ted

ginag2 10-02-2023 04:36 PM

Now working fine (as of 3:15 p.m.) - thanks. - Gary

bet2windo 10-02-2023 06:25 PM

Thanks Ted,
It seems to be working ok.

Ted Craven 10-03-2023 02:07 AM

Update ...
 
TwinSpires has changed something about how it provides data which RDSS has been accessing :( (PrimePower and ProfitLine Ratings, tote data, Scratches). Today, I did a number of tests with the API which RDSS uses to access this TS data. I developed several questions which I put to the technical support of the tool provider I use within RDSS (NOT TwinSpires) to access and process website data (they are much more proficient than I am at this stuff).

I expect feedback tomorrow Tuesday which I hope will give me some clues about what is changed and how to fix it.

To be clear - I get NO technical support from TwinSpires: they are free to change their own website access for programs (API) whenever they wish and are not working with any 3rd parties (like RDSS) for direct access to their data.

I will report here on my progress. Meanwhile, everyone can continue using RDSS in the traditional way without TwinSpires Ratings by switching off those ratings within RDSS as described above. A reminder - you can still get those Prime Power and ProfitLine ratings if you want them by going directly to TwinSpires via the TwinSpires button on the RDSS Desktop; you will have to integrate them into RDSS manually as best you can.

Very sorry (and annoyed) this is happening (again)! But, we take what we get.

Ted

Lee Adams 10-03-2023 09:30 AM

I get not responding no matter where I try and click (configure). been this way since 4 am EST 10/3.
lee adams

Ted Craven 10-03-2023 12:22 PM

Quote:

Originally Posted by Lee Adams (Post 152512)
I get not responding no matter where I try and click (configure). been this way since 4 am EST 10/3.
lee adams


Lee, please see post #2 above.


Ted

Ted Craven 10-04-2023 03:44 PM

Update 10/4
 
TwinSpires has obviously made some change to their site such that previously functioning hits for data (Tracks, Ratings, Scratches, Tote Data) no longer work from within RDSS. Though, the same hits from within a browser DO still work fine. It's as if they intended to prevent non-browser access to their data ...

I have consulted several technical sources for assistance but that has not been fruitful so far. I am prepared to spend more time researching and sleuthing solutions myself before giving up and concluding that all those resources are no longer accessibly by RDSS. This will take a little time though.

Meanwhile - all the data is clearly still there, and doesn't require any TwinSpires account or login. Just use the TwinSpires button on the RDSS Desktop and pick the track and race you want. Agreed - the data is so much less accessible than after RDSS processes it :(. TwinSpires has never promised any support for this kind of access - we were always just respectfully helping ourselves ...

Remember - if you run into 'not responding' or 'stalling' problems in RDSS, just turn OFF TwinSpires access in the Config Screen per the advice further above. Then you'll be back in business, just minus the stuff we've been getting from TwinSpires.

Ted

dlivery 10-04-2023 05:26 PM

Thanks for the update
Let’s keep the rdss alive.

stormbringer 10-05-2023 12:25 AM

ted!!!
 
Thanks for all you do with out you we would not have rdss If I can help you in any way I will JUST SAY THE WORD.

STORM

Ted Craven 10-06-2023 01:46 AM

Working Again!?
 
Please - I request everyone to test RDSS again (current version) with the TwinSpires settings set back to ON (Get Tote, Get TS Ratings).

After testing this evening, it appears everything is working again as before: Tote, Scratches, TS Ratings (Prime Power, ProfitLine), MTP.

I will be doing a lot more testing myself tomorrow, and I can't promise this will be consistent or what will need to be done about it. But if you enjoyed those aspects of RDSS, please test whether you can resume using them.

Ted

AwesomeAgain 10-06-2023 03:44 AM

Ted,

Thanks for all of your help and technical support. :cool::cool:

Ted Craven 10-06-2023 03:53 AM

Quote:

Originally Posted by AwesomeAgain (Post 152532)
Ted,

Thanks for all of your help and technical support. :cool::cool:


You're welcomed Brian! Fingers crossed :shock:


Ted

The Pook 10-06-2023 10:45 AM

Ted,

My current version is 2.2.2023.65. Why does RDSS suggest an update to 2.2.2020.22?

Pook

kahunab 10-06-2023 10:49 AM

Thanks Ted, for all your help and hard work. Everything seems to be working well again here in Colorado.

Dick

Lt1 10-06-2023 11:09 AM

Hi Ted. All is a ok and working fine here in NY
Tim

Ted Craven 10-06-2023 02:07 PM

Quote:

Originally Posted by The Pook (Post 152534)
Ted,

My current version is 2.2.2023.65. Why does RDSS suggest an update to 2.2.2020.22?

Pook


That RDSS Desktop Update notice button is ineffective in the current version since I relocated downloading the RDSS Installer to TrackMaster's servers. It will resume intended effectiveness in a new update soon.


Ted

kahunab 10-06-2023 10:54 PM

Raced all day, used 4 tracks and everything worked well. Thanks again Ted!

darmar 10-07-2023 12:05 PM

Things are back working properly again worked TDN yesterday with no issues at all
Darryl

Ted Craven 10-09-2023 06:40 PM

TwinSpires via VPN
 
One issue reported with TwinSpires - maybe not even be related to this recent problem - is that when you run RDSS with some VPN connections to the internet, TwinSpires will still reject RDSS access. (VPN = Virtual Private Network, for security or masking your actual location).

We tested this because one user was still having RDSS/TS access problems, yet when we turned the VPN OFF entirely, the problem went away.

This may not apply to ALL VPN access, but it did for VPN access provided by MacAfee Security software (and we tried various VPN geo-location settings).

Bottom line going forward - if you still encounter the 'not responding' or 'spinning wheel' slow-down - try checking if you are running your internet access through a VPN, then try turning that VPN setting OFF.

Ted

Bill Lyster 10-10-2023 01:11 PM

Ted,

Thank you so much for your patience and knowledge in solving this problem.

And thanks for all the other things you do to keep us up to speed in RDSS.

Bill

bet2windo 10-10-2023 01:15 PM

Ted,
works with 2 ts checkboxs checked 10/9

Ted Craven 10-11-2023 12:25 AM

Quote:

Originally Posted by Bill Lyster (Post 152550)
Ted,

Thank you so much for your patience and knowledge in solving this problem.

And thanks for all the other things you do to keep us up to speed in RDSS.

Bill

You're most welcomed Bill! Every failure makes us wiser!


And nice to catch up with you for a bit.



Ted

Ted Craven 10-11-2023 12:26 AM

Quote:

Originally Posted by bet2windo (Post 152551)
Ted,
works with 2 ts checkboxs checked 10/9


Good to hear - thanks Fred!


Ted

polambi 10-19-2023 03:26 PM

Breaking News !!!!!! RDSS back to normal.
 
Hi Everyone. I was checking the scratches this morning for Baq, and was pleasantly surprised to see the tote and scratches working in RDSS.
I hope I get my pick5 today at Baq.
Have a great weekend

Ted Craven 10-19-2023 06:08 PM

Quote:

Originally Posted by polambi (Post 152611)
Hi Everyone. I was checking the scratches this morning for Baq, and was pleasantly surprised to see the tote and scratches working in RDSS.
I hope I get my pick5 today at Baq.
Have a great weekend

Thanks for the confirmation polambi! Yeah, looks like the former state of things is again in operation. Though, as this last interruption has proven, that interruption could recur. My aim is to have the coming update better handle this kind of unexpected event and recover more gracefully. Also a few programming tricks to keep TS happy.

Good luck with your Pick5 today at Aqueduct!

Ted

Ted Craven 11-13-2023 12:14 PM

TwinSpires Problem again
 
As of this morning Monday Nov 13, this issue with RDSS being non-responsive has resumed. :(

As with the previous time recently, after opening RDSS, you must go to the Configure Screen and uncheck BOTH the TS Ratings and Scratches and Tote boxes, Save then restart RDSS. Tote and Prime Power and ProfitLine ratings will not be available. Please re-read the initial posts in this thread for more details.

I had set aside further research into how to work around this (if possible) whenever TwinSpires tinkers with these settings. But I'll have to renew that study again.

Meanwhile - as before, if you want those TS Ratings, you can get them from TwinSpires via the TwinSpires button on the RDSS Desktop (use the TwinSpires Tabs: Program --> Basic / Class screens).

Ted

darmar 11-13-2023 12:21 PM

RDSS is not responding
 
I'm working the Parx card today 11-13 but RDSS is stuck in not responding mode since 9:45 EST. Is anyone else experiencing the same problem
Darryl

Ted Craven 11-13-2023 12:45 PM

Quote:

Originally Posted by darmar (Post 152809)
I'm working the Parx card today 11-13 but RDSS is stuck in not responding mode since 9:45 EST. Is anyone else experiencing the same problem
Darryl

Darryl, we posted near the same time - I moved your post here. Hopefully the advice above answers this for now.

Ted

Lt1 11-13-2023 01:33 PM

Darryl had the problem but Teds' fix has program working again minus tote board. I still have Profit Line & BPP #S showing..
Tim

Ted Craven 11-13-2023 09:13 PM

Quote:

Originally Posted by Lt1 (Post 152811)
Darryl had the problem but Teds' fix has program working again minus tote board. I still have Profit Line & BPP #S showing..
Tim


Tim, I suspect you fetched those ratings before TS changed their website this morning. Most others were not so lucky.


Ted

Lt1 11-13-2023 10:33 PM

Yes Ted I finished the card about 8:15 am eastern so I had the numbers before the problem began.
Tim

stormbringer 11-17-2023 09:38 PM

7:31 pm Arkansas time
 
rdss not working with or without ts data to tell the truth I can't even get to the config screen I will try again after I work a race. check here for anything new or if it works. at 8:30pm central time

Ted Craven 11-17-2023 10:50 PM

Quote:

Originally Posted by stormbringer (Post 152839)
rdss not working with or without ts data to tell the truth I can't even get to the config screen I will try again after I work a race. check here for anything new or if it works. at 8:30pm central time


Either:

1. open RDSS, count to 60 (i.e. wait 60 seconds), then go to the Config screen, or

2. read this Post #2: http://paceandcap.com/forums/showpos...02&postcount=2 to edit the TwinSpires settings outside RDSS software, in the RDSS Config file.

Ted

Mr.Pagine 11-18-2023 08:46 AM

Any update on the fix?
 
There was a great song by Dire Straits called "Money For Nothing", and the opening line was "I want my MTV" and was repeated four or five times, incredible song.

This software is incredible, and "I want my Profit Line & BPP" :)

Enjoy the weekend folks, and don't forget to cash!!

Jon

DanBoals 11-30-2023 03:33 PM

Hi Ted,

I know you do not want to hear this, but RDSS without the tote and the results is a lot less useful to me. Maybe other customers are fine without the tote and results, I do not know.

Is there anyway Trackmaster can provide this? I pay Trackmaster for data, I do not pay Twinspires for data. Before moving to Nevada, I bet over a 100k a year with Twinspires and was part of the elite program, but Nevada made it illegal to do business with out of state betting companies like Twinspires so now I have to use the much worse instate options, at least until I move elsewhere.

Right now, without the tote updates to know what the current odds are and without the results to get saved automatically to my exports, it is just not worth what limited time I have to do races to keep RDSS.

I plan on letting my RDSS subscription expire next month, and will be gladly restart it when these issues are permanently fixed. Hopefully Trackmaster will lose enough business that they will step up and provide a tote and result service to their customers instead of leeching off Twinspires.

I love RDSS and have been a subscriber for 8 years or so, but now that I am playing a couple times a month, it is just not worth all the extra work that the loss of the tote and results requires.

I hope this gets fixed, I look forward to subscribing again in the future.

Dan

Ted Craven 11-30-2023 04:33 PM

Dan, sorry to lose you (even if temporarily) as a RDSS subscriber. Tote has been part of RDSS from the beginning (though intermittently, over various tribulations with SuperTote, then BrisNet, then TwinSpires). TwinSpires' BPP and PL public ratings are only available from them (and are still available). Results have been available in RDSS from TrackMaster/Equibase from the beginning - only not used as such, I agree (quick results/prices, accessible for modelling). I plan to do better with that Results data from them.

TrackMaster/TwinSpires is not an ADW and do not provide tote data. That's just the way it is and will not change soon. I have to get that where and how I can find it.

TwinSpires has upped their scrutiny and blocking of apps which fetch data from their site, as is their right. RDSS is not re-selling that data, only providing what you would otherwise see with your eyeballs when looking at their web pages.

I have not been sitting on my hands with this problem. Nor have I been providing the blow-by-blow of all the things I have been doing to understand the problem and come up with creative solutions. I just want to provide a solution. I believe I am close, but stay tuned - you and everyone.

Each person has their own level of how deep it is worth their while to dig for combinations of data to crack the horse race analysis problem. I respect your limits. Others have more time to spend and have chosen to dig deeper, many with uninterrupted success.

Wishing you all the best!

Ted

Ted Craven 11-30-2023 08:43 PM

1 Attachment(s)
I am making progress ...

Attachment 52544

Lee Adams 12-07-2023 09:45 AM

Quote:

Originally Posted by Ted Craven (Post 152502)

Most people I've corresponded with this morning are able to at least load RDSS to get to the Configure Tab to make the changes I advised. However, if you cannot load up RDSS to the main Desktop screen, close RDSS then go to the Configure file and make the changes there, outside RDSS.

The file is located here (use your Windows File Explorer): c:\Rdss22\Configure\Configure.ini. Open this file in a text editor by double-clicking it. Search for the following terms (found within the [General] section):


//Tote/Scratch Retrieval: ON=1 OFF=0
Tote_enabled=0

//TS Ratings/Scratch Retrieval: ON=1 OFF=0
TS_ratings_enabled=0


If the value following the = sign is a 1, change them both to a 0 (i.e. OFF).

Save the file, close it, then restart RDSS.


Note: if your Configure file does not HAVE these 2 terms (an older/long-standing Configure file setup), you will have to add them. With the Configure.ini file open, look for the line reading [General]. On a line AFTER that line (i.e. within the General Settings group) add the 2 lines above (e.g. copy and paste the lines above to your Configure file).


Ted

my setting are correct but not getting PL or PBB. Is there a way for me to find these as I been trying unsuccessfully to locate.
tks
lee adams

Ted Craven 12-07-2023 06:36 PM

Lee, RDSS currently cannot access those Ratings or Tote or Mutuel results from TwinSpires. It will do again soon (likely January, by now) in an update.

The instructions in this thread are to help you get RDSS working again (by turning OFF the automatic attempts to connect to TS which cause RDSS to stall or run slowly). But you still won't have those ratings right now.

Meanwhile, there are lots of other ratings!

Ted


All times are GMT -4. The time now is 02:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.