![]() |
Ted - Speculator error message problem
Hi Ted,
Sorry to bother you about this software glitch, but after trying to deal with it for awhile myself, I decided to check with you. This is a problem you've dealt with in the Spec FAQ - error message DBFNTX./1012. I've tried the solution you suggested there - copying the zipped files into a new folder (at least as far as I understand) but have had no luck in eliminating the problem. Any help appreciated. BTW, I looked for a Spec to post this, but couldn't find it. Cheers, B Jennet |
B Jennet,
I'll move this back to the Speculator Forum. The absolutely simplest solution is to make your computer as if Spec160 had never been installed there, then install it anew. Try this - rename your existing SPEC160 folder to something else (e.g. SPEC160-PREVIOUS) then create a new, empty SPEC160 folder and extract the files from the distribution ZIP file to this new, clean SPEC160 folder. Now - downloaded TrackMaster files for Spec get stored in C:\TRKMAST folder. Either clean out any files from C:\TRKMAST which are not data-type files (e.g. AQU1119r.EXE) - this would include any files with DBF extensions, or simply rename this C:\TRKMAST folder to something else (e.g. TRKMAST-PREVIOUS) and create a new, empty TRKMAST folder on your C: drive. Both of the above suggestions effectively create a new, clean SPEC environment on your computer (with the previous one saved, for reference), and SPEC160 should work again normally. Let me know if it does. yours, Ted |
Thanks, Ted
Quote:
This seems to have worked well, but given my dubious computer skills, I always feel like I should keep my fingers crossed. As I said, I had tried this already, but without previously removing non-exe files from the Trackmaster folder, as you suggested. Much thanks for your assistance, as always. Cheers, B Jennet |
Spec problem
Hi Ted.. First thank you for the clean copy. I omitted that I am using
the program on windows vista operating system. The same problem is occuring and truly has me going in circles. I made a clean Spec directory and downloaded the program. My Trackmaster directory "TRKMAST" is clean. Extracted the zip file and tried to run the program with the same problem occurring. It's a mystery to me. Joe |
Joe, I too have Vista and Spec160 on one computer and tried your sequence just now: the F3 key shows Perceptor numbers as expected. And Esc takes me to Calculations and all Ratings and Graphs screens as expected. So, nothing abnormal for me. Have you successfully been using Spec160 on this Vista computer up until just now? Are you SURE the Spec160 folder is a new one, and clean? Can you think of something you installed on your computer, or some change you made since you last successfully used Spec160? Did you start using a new monitor? Or install a new graphics card? Did Vista update itself recently? Mine did last night (May 14). if you 'roll-back' your Windows to a previous 'check-point' before a date where you KNOW you successfully used Spec160, perhaps that will help. Try these and get back to me. We can connect by TeamViewer and attempt to trouble-shoot, if you like. Ted
|
I have had a number of updates to vista since I stopped using Spec160. It had always worked fine. No hardware changes. I wanted to evaluate a few races using spec and got this surprise. When doing more than 2 tracks I need to use a computer, when you pass 70 things seem to take longer in my case. I can use Validator so my work proceeds as I supplement a small SS check from the track. I will see what I can do and report back on what I find.
Thank you for your help Ted it is much appreceated. Joe |
Joe,
Congratulations on passing 70! I look forward to that one day myself (not too soon, though ...). Re Spec160 - bizarre why a fresh install on an updated Vista computer would present any problems. I'm pretty confident I could help solve the problem for you, if ever you decided we should connect computers. The process is really simple. Just email me if ever you decide you want to do that. Until then - good luck with Validator and the Match Up! cheers, Ted |
Hi, I am trying to load a race file into Speculator. The message says No Files Have Been Downloaded for 10-13-2019.
I placed the data file in the trkmast directory. Any help help would be appreciated. Thank You Wayne |
Speculator, as with Validator, looks for TrackMaster data files on a fixed folder named c:\trkmast. If you're exporting those files from RDSS, that's the default export folder used.
If you're running Spec in DOS, or in Windows XP (or some normal environment which can run natively those older DOS programs), you likely have Spec installed in folder c:\spec160 (or whatever flavour of Speculator you use). In this case, you can just look in folder c:\trkmast to see if you indeed have the file there which you are telling Speculator to look for. If the card file is not there, put it there :) If however, you are using a DOS emulation environment environment like Dosbox, perhaps running in Windows 10 (which if you are BTW, would have been nice to mention) -- then typically you 'mount' your local Speculator folder (say, c:\spec160) as a Drive volume. For example, in Dosbox: mount c: c:\spec160. Now you address Speculator as being in the root folder of Drive C within Dosbox. HOWEVER - in this setup, since Speculator looks for TrackMaster data files in c:\trkmast, you must actually place your TrackMaster data files in the folder c:\spec160\trkmast, which to Speculator running in Dosbox Drive C, will look like c:\trkmast. Ta da! If Dosbox is not involved, well - try to double check you are specifying the correct folder location and card files you thought you did. That's all I got, so far. Ted |
Ted, thank you for the advice, I still cannot get it work. I will keep trying.
I am using windows 10 with dosbox. Wayne |
Pilot, did you ever get Spec to work on Win 10? I have Win 8.1 and it tells me no data files installed, although they are on Trkmast.
|
I've been told that Spec will run without dosbox AND recognize TRKMAST DATA on a 32 bit computer. Does anyone here know if that's true?
|
Quote:
On Win 8 or 10 (on 64 bit Windows) you need the 64 bit DosBox. I think it's described elsewhere in this Forum, but you MOUNT a DosBox Drive C as an alias for (say) C:\Spec160. So then, since Spec (and Val) insist of finding data on C:\trkmast folder, you would need to place TrackMaser files in C:\spec160\trkmast folder (so that in DosBox, that looks like C:\trkmast And - if you use RDSS, you can export TrackMaster data files to that folder so Spec/Val can use them (that's how we proved to Doc that RDSS in Val mode created identical readouts). Ted |
Thanks, Ted.
I'll see what I can do. Chuck |
Lol - I just read my previous post from 2019 above. Sorry, I literally said about the same thing again ROTFL
So, either post will do. Anyway, that's all I got. Good luck! Ted |
If the software runs in a 32 bit environment, can't you set a virtual machine and install either windows xp or 7 and run it in that? Once you set it up you do not have to mount and dismount drives each time you want to use it.
|
Yes indeed you can do that too. Install VirtualBox, VMWare, MS Hyper-V, etc. Then obtain and install an older Windows version (XP, Win7), then install Speculator/Validator, whatever.
Or, install DosBox on an existing Win10 with an existing Speculator/Validator, set up a batch file to config and run it. Several options. Ted |
I have Dosbox but when I look for 64 bit dosbox all I can find is 32 bit.
The rest is over my head... Chuck |
That's the one - 32 bit version:
https://sourceforge.net/projects/dos...r.exe/download Works like a charm on Windows 10. Comes with instructions (or use the hints in this Thread). https://www.dosbox.com/download.php?main=1 Ted |
Lefty, if you can load Speculator in your Windows 8.1 - congratulations: ALL functionality of Spec should then work for you. If you can't even load it, you need DosBox (or some other more complex solution, if you prefer), per the above discussion.
if you can run Spec without DosBox but can't find any TrackMaster files (i.e. in c:\trkmast folder) - well, how do know there ARE any files there - did you check? If you are running Spec within DosBox, per the above discussions, TrackMaster files need to be placed in c:\spec160\trkmast folder. FWIW (and not to belabour the point) - all these pesky issues running old DOS programs is why I rewrote Spec and Val 15 years ago for Windows and called it RDSS. Ted |
Ted I can load it through dosbox just fine but it can't find trkmast files. I have plenty of old files in my trkmast folder.
when I try to load without dosbox I get this app won't run on this computer. I have other Sartin prms(manual) that run fine on dosbox. So I am flummoxed. Thanks, though. chuck |
Quote:
Also, what is the name of the folder where you have Speculator installed? For example: c:\spec160? Ted |
Ted, Trkmast on C drive
Spec160 I put in my documents, then pasted the spec160 folder to desktop Thanks for taking so much time with this. It's greatly appreciated Chuck |
Whatever folder the Speculator program is in, you need to make a sub-folder named trkmast and move your TrackMaster data files there.
Then when you run Spec within DosBox, and MOUNT drive C as 'the folder where Spec is', when Spec looks for files in C:\trkmast it will find them. It will NOT find them in the Trkmast folder on your C drive (c:\trkmast) - as you have discovered! Ted |
Thanks ted. I put the trkmast folder into folder where I have spec but no go. So I will make a sub folder and see that works.
Thanks again, Chuck |
| All times are GMT -4. The time now is 12:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.