Pace and Cap  - Sartin Methodology & The Match Up

Pace and Cap - Sartin Methodology & The Match Up (http://paceandcap.com/forums/index.php)
-   RDSS Beta Testers Questions & Answers - CLOSED (http://paceandcap.com/forums/forumdisplay.php?f=40)
-   -   Raw readouts (http://paceandcap.com/forums/showthread.php?t=4307)

RichieP 08-02-2008 11:29 AM

Raw readouts
 
2 Attachment(s)
Hi Ted
I am using NO adjustments of any kind and am in Spec mode:

The #7 is the horse in question. First screenshot shows my lines and looking at the #7 he looks very fast out of that turf sprint.

Now the 2nd screenshot shows the adjusted tab. OK the 7 gets slowed down by a full second at the 1st call and MORE than 2 seconds at the 2nd call while everyone else remains the same.

My question is if I am at no adjustments on config how is this being done with the 7? That is a freaking HUGE adjustment.
Thanks

Ted Craven 08-02-2008 11:45 AM

If there are no ITV or DTV adjustments, it's the sprint to route projection.

Ted

P.S. Gone for the weekend, but I'll look further when I get back...

RichieP 08-02-2008 04:18 PM

1 Attachment(s)
Quote:

Originally Posted by RichieP (Post 36748)
Hi Ted
I am using NO adjustments of any kind and am in Spec mode:

The #7 is the horse in question. First screenshot shows my lines and looking at the #7 he looks very fast out of that turf sprint.

Now the 2nd screenshot shows the adjusted tab. OK the 7 gets slowed down by a full second at the 1st call and MORE than 2 seconds at the 2nd call while everyone else remains the same.

My question is if I am at no adjustments on config how is this being done with the 7? That is a freaking HUGE adjustment.
Thanks

For informational purposes only (we do not advocate gambling) :eek:
the #7 went off at 8/1 as the fastest horse in the field and got nipped at the wire for the win.

That is no slow horse man

RichieP 08-03-2008 09:20 AM

Quote:

Originally Posted by Ted Craven (Post 36749)
If there are no ITV or DTV adjustments, it's the sprint to route projection.

Ted

Morning Ted.
I looked at 20 or so of these guys and you are right about it being the S-R adj.
Thank you.

Charlie D 08-19-2008 06:01 PM

2 Attachment(s)
HI Ted

A Fr1 adjustment query

DTV and ITV are turned off

can you explain the adjustments being made to the Fr1's here


5f Dirt

Ted Craven 08-23-2008 12:58 PM

Charlie,

(Back home now).

Again, this is the distance equalization adjustment. Here, we're adjusting all distances to 5.0 furlongs at a mythical (normalized) surface. According to your screen, the F1 adjustment from 6f to 5f is 0. From 5.5f to 5f the adjustment is -.4 tenths (i.e. the time gets faster).

Why is this? Aside from being historical (i.e. that's what Validator and Speculator produce), I have no answer. Presumably someone once noticed in general that 5.5f F1's ran a bit slower than 5f or 6f F1's and needed a boost. If your records are showing you that those 5.5 to 5.0 (or 5.5 to 6) adjustments are just too fast at F1, then mentally deprecate them in the subsequent energy readouts. Otherwise (and I may be wrong, and no disrespect intended), I'm guessing Sartin would say something like: it has worked well for 10 years, so stick with success - it's a finely tuned engine...

Ted

Charlie D 08-23-2008 01:09 PM

Hi Ted

Thanks for reply

What i'm trying to understand is why is it adjusting some and not others ~ look at Top one, it's not adjusted the 6f race Fr1 :confused:

I know your busy a man and probably have more important stuff to do, but if you don't ask you don't get :)

Would there be any chance of having a Matchers Screen that only adjust's for different distance's using Jim's universal adjustments ???

Ted Craven 08-23-2008 01:19 PM

Charlie,

I agree - asking is the prelude to answering!

Again, as I stated in the above paragraph 1, and I agree with your observation, 6f to 5f gets no F1 adjustment, while 5.5f does, and for the reasons I speculate on in paragraph 2.

There are plenty of other ways to equalize times to today's distance, including using turn-back times from longer races. In the future, I don't see why not a more Match Up (Bradshaw) method of creating POR times for today's distance could not also be employed. I may leave that to Richie's initiative, along with other Match Up related tools.

Hope that was a useful answer.

Ted

Charlie D 08-23-2008 01:25 PM

Thanks Ted

I'm think a screen using Jim's adjustments could be a good addition and may also be of help to those wanting to learn the the Match Up


All times are GMT -4. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.