Go Back   Pace and Cap - Sartin Methodology & The Match Up > Classic Sartin Programs - Support, Discussion > Speculator
Mark Forums Read
Google Site Search Get RDSS Sartin Library RDSS FAQs Conduct Register Site FAQ Members List Search Today's Posts

Speculator Speculator - FAQs, Technical Support, Examples, etc

Reply
 
Thread Tools Display Modes
Old 02-24-2006, 05:00 PM   #1
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
Speculator Frequently Asked Questions (FAQ)

Hello,

I started this topic so there could be a place to post Questions and Answers, usually of a technical nature, about Speculator. How to install it, reinstall it if it crashes, screen shots of error messages and what to do about them, or other issues related to care and feeding of these old DOS programs.

In some cases, advice will pertain to any of the DOS Sartin programs, or in some cases, just how to use Windows, or how to use the DOS command prompt.
__________________

R
DSS -
Racing Decision Support System™
Ted Craven is offline   Reply With Quote
Old 02-24-2006, 05:06 PM   #2
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
Spec Crashed during a race, and race won't reload

Question:

Spec (or Val) crashed on a particular card. Won't subsequently load that card no matter what.

Answer:

On your program folder (e.g. SpecPA, Val3c), look for 3 files representing your race card, for example, AQU0223R.DBF, AQU0223H.DBF, AQU0223P.DBF. Delete these 3 files using Windows Explorer. Now try loading the card afresh.
__________________

R
DSS -
Racing Decision Support System™
Ted Craven is offline   Reply With Quote
Old 02-24-2006, 05:49 PM   #3
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
Spec won't run at all

Question:

Spec won't even run and get to the Main Menu. It crashes with various error messages.

Answer:

Some of the files needed to run are damaged, missing or corrupt. Best to delete and reinstall the whole program.


Procedure to use if you have the software on a diskette:


Using Windows Explorer:

Let's presume the software is SpecPA and installed in the folder SpecPA.
  1. In Windows Explorer, delete ALL the files in the current SpecPA directory
  2. Put the SpecPA diskette in the A drive, and view that drive’s files as well in Windows Explorer
  3. Highlight all those Drive A files (Ctrl-A), the copy them to the clipboard (Ctrl-C)
  4. Move to the (now empty) SpecPA folder; Paste the copied files from the (A Drive), by Ctrl-V
  5. The files are thus moved from the A drive to the SpecPA folder
  6. Click on SpecPA.exe to see if it works
  7. Make a Desktop icon for SpecPA, by right clicking on SpecPA.exe, Send To, Desktop (create shortcut)
Using the DOS prompt:
  1. Get a DOS prompt (DOS command window).
  2. Delete all the files in SPECPA directory by typing: DEL \SPECPA\*.*
  3. With the SpecPA diskette in your A drive, copy the files to the (now empty) SPECPA directory, by typing: COPY A:*.* \SPECPA
  4. After all the files are copied, make sure you are in the SPECPA directory, by typing: CD \SPECPA, then type SPECPA to load up the SPECPA program.
  5. You should still follow point #7 above to make a Desktop icon for easy access to the software
Procedure to use if you have the software in a ZIP file:
  1. In Windows Explorer, delete ALL the files in the current SpecPA directory, BUT, DON'T DELETE THE ZIP FILE!
  2. In Explorer, find the ZIP file and double-click on it. In WinXP, this usually opens the ZIP file, displaying the contents of the ZIP as if it were a folder of files. (In other than WinXP, your experience may vary - that's another FAQ).
  3. Press Ctrl+A to highlight all the files contained within the ZIP file.
  4. Press Ctrl+C (or right-click, then choose Copy) to Copy all the highlighted files to the Windows Clipboard (there's no message - it just happens)
  5. Switch back to the (now empty) SpecPA folder (usually, pressing the Backspace key moves you out of a ZIP file view and back into the folder you were just looking at, before you went into the ZIP file)
  6. Press Ctrl+V (or right-click, then choose Paste) to paste the files you just Copied, into the SpecPA folder. You should see the same files you highlighted now being copied one by one.
  7. Locate the SpecPA program and double-click on it to try to run the software. Hopefully now it will not crash.
  8. Again, make a Desktop icon for SpecPA, by right clicking on SpecPA.exe, Send To, Desktop (create shortcut)
__________________

R
DSS -
Racing Decision Support System™
Ted Craven is offline   Reply With Quote
Old 02-24-2006, 05:52 PM   #4
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
DOS Programs run really slow

Question:

These old DOS programs run really slowly, hog all of Windows resources.

Answer:

Use TameDOS (www.tameDOS.com). It costs $20 bucks, you get a 30 day free trial first. It will solve all your problems with DOS misbehaving under WinXP and earlier Windows version.

I can run several DOS apps (e.g. multiple copies of Spec, Val, on different directories) at the same time, with no loss of speed.
__________________

R
DSS -
Racing Decision Support System™
Ted Craven is offline   Reply With Quote
Old 02-25-2006, 01:54 PM   #5
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
How to Install software from a ZIP file

Question:

How do I extract Speculator files from a ZIP file package, and put them in a folder where I can run the software?

Answer:

Let's presume you downloaded Spec150.zip to your Desktop. Or you may need to reinstall one of the other versions of Speculator received from Guy Wadsworth in a ZIP file. Let's presume you use Windows XP. WinXP treats ZIP files like folders: if you double-click on a ZIP file, it opens up to display a list of files contained within it, as if you were looking at a regular folder of files.
  1. First, using Windows Explorer, make a new folder for your Speculator files. It is always best to start with a clean, empty folder.
  2. Next, double-click on the ZIP file containing your Speculator (e.g. found on your Desktop, or wherever you downloaded or stored it). A list of files appears.
  3. Press Ctrl+A to highlight all the files contained within the ZIP file.
  4. Press Ctrl+C (or right-click, then choose Copy) to Copy all the highlighted files to the Windows Clipboard (there's no message - it just happens).
  5. Switch to the new Speculator folder you created in Step #1.
  6. Press Ctrl+V (or right-click, then choose Paste) to paste the files you just Copied, into the new Speculator folder. You should see the same files you highlighted now being copied one by one.
  7. Locate the Speculator program (depending on version: Spec150.exe, SpecPA.exe, etc) and double-click on it to test run the software.
  8. For future use, make a Desktop icon for Speculator, by right clicking on the program (e.g. Spec150.EXE, SpecPA.exe, etc)then choose 'Send To' from the popup menu, then 'Desktop (create shortcut)'. A small DOS icon will be placed on your Desktop which you can click on to run the program you just installed.
Don't forget, you need to download TrackMaster files to a folder named C:\TRKMAST - that's where Spec and Val look for race cards.

Now, if you use a Windows vesion earlier than WinXP (e.g. Win98, WinME, Win2000) or your Windows XP does not have ZIP extraction built in by default, you will need to first download a ZIP file extraction utility such as WINZIP (http://www.winzip.com/). Install this software, then when you double-click on a ZIP file to open it, choose to open it with (e.g.) WinZIP (and make WinZIP the default program to open ZIP files), then follow the instructions above.
__________________

R
DSS -
Racing Decision Support System™

Last edited by Ted Craven; 01-08-2008 at 08:03 AM. Reason: Added info about WinZIP utility for non WinZP systems
Ted Craven is offline   Reply With Quote
Old 03-13-2006, 05:07 PM   #6
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
In Spec150, the Pre Analysis screen is sometimes blank

Question:

In Spec150 and Spec160, the Pre Analysis screen is sometimes blank. Why, and how do I fix it.

Answer:

This is a bug which occurs as follows. Pick a card, then a race, the go to the Pre Analysis screen. Pick any Menu item to view Pre Analysis (e.g. 1 = All Pacelines 2 = Pacelines by Surface 3 = Pacelines by Sprint or Route and Surface), then view the resulting Pre Analysis ranks. Exit to the Pre Analysis Menu, then immediately again select one of the PA view (1,2,3 menu choices). The PA ranks screen will be blank - no ranks are displayed.

To fix this, return to the Pacelines and Calculations Menu and again select Pre Analysis. You can now view PA ranks again.


Comment:

In Spandx and Spec150, Guy attempted to merge the Pre Analysis ranks with the Past Performance screens. You only have to display the PA ranking screen once (for the chosen filters you prefer - days/distance/surface), then the ranks are included in the PP screens, to the right of the Equalized, Normalized, Adjusted upper panel. In previous versions with Pre Analysis, you could mark a < symbol indicating the best rank for a given factor. In Spandx and Spec150, this data entry is no longer possible - instead the ranks just show up on the PPs.
__________________

R
DSS -
Racing Decision Support System™

Last edited by Ted Craven; 02-26-2007 at 05:39 PM.
Ted Craven is offline   Reply With Quote
Old 07-31-2006, 12:53 PM   #7
dugoutgold
Grade 1
 
Join Date: May 2006
Posts: 206
Hi Bill, Can you tell me exactly how your opening all the race files on the card, in other words what sequence are you using? Do you mean 1, seclect and calculate race on the main menu first? Im the one who found this bug so Im interested in this. I nver found a way to get around it.

Best Doug
dugoutgold is offline   Reply With Quote
Old 07-31-2006, 07:05 PM   #8
Ted Craven
Grade 1
 
Ted Craven's Avatar
 
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,853
Bill,

I tested this and you're exactly right (but obviously I've forgotten that conversation!)

Here's what I did: from the race menu, open each card you wish to handicap (no need to go to pacelines) before you hit F9 Comments for the first time. For example, if you wanted to handicap races 1,3,5,7,9 for the day, open all those first before handicapping any of them. Then return to the first one (or any one) and F9 Comments will not crash. Unfortunately, the comments still display only once on any of the Ratings screens, but they print out fine.

Doug, F9 Comments are still imperfect, but hope this helps!

Bill, many thanks for the additional workaround!

Ted
__________________

R
DSS -
Racing Decision Support System™
Ted Craven is offline   Reply With Quote
Old 07-31-2006, 08:52 PM   #9
Bill Lyster
Grade 1
 
Bill Lyster's Avatar
 
Join Date: Feb 2006
Location: Escondido CA just 25 minutes from where the turf meets the surf - "...at Del Mar"
Posts: 2,418
Crash prevention program

Doug:

Ted got there first, but just follow what he explained because he explained it perfectly. It should eliminate that type of crash.



bill
Bill Lyster is offline   Reply With Quote
Old 08-02-2006, 02:02 PM   #10
dugoutgold
Grade 1
 
Join Date: May 2006
Posts: 206
thanx Bill, i gave up on the coments screen, just keep the ole pen and and paper handy here.
dugoutgold is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

All times are GMT -4. The time now is 08:56 AM.