Pacelines - Pace and Cap

shoeless · 08-01-2006, 06:05 PM

Has anyone ever put in a bunch of lines for your contenders using either Val or Spec and then letting F6 pick the best line.Then taking those lines you get and run them thru Energy to see what you come up with.Jeff

Forego · 08-01-2006, 06:42 PM

I have tried this with synergism and results were not good.i can not comment on energy software. if you have validator my advice is to use that as a stand alone.

admin · 08-02-2006, 03:07 AM

No and yes
I used the original pacelines from Val and spec
and entered them into Energy/EXDC
I did enter them on Spec-Val then took the top 5
total energy then entered those 5 into EXDC
but I didn't use the F6 or the adjusted normalized equalized
lines

tom · 08-02-2006, 09:19 PM

Jeff,
This idea is good with K Gen - to get contenders and repsresentative pacelines.

I tried what you suggested when I firrt starting learning Val - results were not too good.

shoeless · 08-02-2006, 10:52 PM

Tom,I was just hearing that on a tape about using k gen with Energy.

Houndog · 08-03-2006, 11:25 AM

Jeff, I would agree with Tom on using KGEN for pacelines and contenders. Using the F6 in Validator in theory would seem to work, but I think KGEN or AODDS would work better.

08-01-2006, 06:05 PM	#1
shoeless Grade 1 Join Date: Jun 2005 Posts: 4,151	Pacelines Has anyone ever put in a bunch of lines for your contenders using either Val or Spec and then letting F6 pick the best line.Then taking those lines you get and run them thru Energy to see what you come up with.Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Manual Pacelines	shoeless	Velocity Programs	8	06-18-2006 02:37 PM
Projecting Pacelines	shoeless	Hat Check - How Can We Help You?	3	05-20-2006 09:51 AM

08-01-2006, 06:42 PM	#2
Forego Grade 1 Join Date: Apr 2006 Posts: 639	I have tried this with synergism and results were not good.i can not comment on energy software. if you have validator my advice is to use that as a stand alone.

08-02-2006, 03:07 AM	#3
admin Administrator Join Date: Jun 2005 Posts: 2,643	No and yes I used the original pacelines from Val and spec and entered them into Energy/EXDC I did enter them on Spec-Val then took the top 5 total energy then entered those 5 into EXDC but I didn't use the F6 or the adjusted normalized equalized lines

08-02-2006, 09:19 PM	#4
tom Grade 1 Join Date: Jan 2006 Posts: 644	Jeff, This idea is good with K Gen - to get contenders and repsresentative pacelines. I tried what you suggested when I firrt starting learning Val - results were not too good.

08-02-2006, 10:52 PM	#5
shoeless Grade 1 Join Date: Jun 2005 Posts: 4,151	Tom,I was just hearing that on a tape about using k gen with Energy.

08-03-2006, 11:25 AM	#6
Houndog Grade 1 Join Date: Oct 2005 Posts: 1,258	Jeff, I would agree with Tom on using KGEN for pacelines and contenders. Using the F6 in Validator in theory would seem to work, but I think KGEN or AODDS would work better.