|
|
|
|
|||||||
| Google Site Search | Get RDSSGet RDSS | Sartin Library | RDSS FAQs | Conduct | Register | Site FAQ | Members List | Today's Posts | Search |
| RDSS Beta Testers Questions & Answers - CLOSED Please make new posts in the main RDSS Forum |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Grade 1
Join Date: Jun 2005
Posts: 7,019
|
Raw readouts
Hi Ted
I am using NO adjustments of any kind and am in Spec mode: The #7 is the horse in question. First screenshot shows my lines and looking at the #7 he looks very fast out of that turf sprint. Now the 2nd screenshot shows the adjusted tab. OK the 7 gets slowed down by a full second at the 1st call and MORE than 2 seconds at the 2nd call while everyone else remains the same. My question is if I am at no adjustments on config how is this being done with the 7? That is a freaking HUGE adjustment. Thanks
__________________
"Grampy I'm talking to you!" |
|
|
|
|
#2 |
|
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 9,264
|
If there are no ITV or DTV adjustments, it's the sprint to route projection.
Ted P.S. Gone for the weekend, but I'll look further when I get back...
__________________
RDSS - Racing Decision Support System™ |
|
|
|
|
#3 | |
|
Grade 1
Join Date: Jun 2005
Posts: 7,019
|
Quote:
the #7 went off at 8/1 as the fastest horse in the field and got nipped at the wire for the win. That is no slow horse man
__________________
"Grampy I'm talking to you!" |
|
|
|
|
|
#4 | |
|
Grade 1
Join Date: Jun 2005
Posts: 7,019
|
Quote:
I looked at 20 or so of these guys and you are right about it being the S-R adj. Thank you.
__________________
"Grampy I'm talking to you!" |
|
|
|
|
|
#5 |
|
Match Up Apprentice
Join Date: May 2008
Posts: 2,105
|
HI Ted
A Fr1 adjustment query DTV and ITV are turned off can you explain the adjustments being made to the Fr1's here 5f Dirt
__________________
"To me, The Match Up supercedes everything" Last edited by Charlie D; 08-19-2008 at 06:14 PM. |
|
|
|
|
#6 |
|
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 9,264
|
Charlie,
(Back home now). Again, this is the distance equalization adjustment. Here, we're adjusting all distances to 5.0 furlongs at a mythical (normalized) surface. According to your screen, the F1 adjustment from 6f to 5f is 0. From 5.5f to 5f the adjustment is -.4 tenths (i.e. the time gets faster). Why is this? Aside from being historical (i.e. that's what Validator and Speculator produce), I have no answer. Presumably someone once noticed in general that 5.5f F1's ran a bit slower than 5f or 6f F1's and needed a boost. If your records are showing you that those 5.5 to 5.0 (or 5.5 to 6) adjustments are just too fast at F1, then mentally deprecate them in the subsequent energy readouts. Otherwise (and I may be wrong, and no disrespect intended), I'm guessing Sartin would say something like: it has worked well for 10 years, so stick with success - it's a finely tuned engine... Ted
__________________
RDSS - Racing Decision Support System™ |
|
|
|
|
#7 |
|
Match Up Apprentice
Join Date: May 2008
Posts: 2,105
|
Hi Ted
Thanks for reply What i'm trying to understand is why is it adjusting some and not others ~ look at Top one, it's not adjusted the 6f race Fr1 I know your busy a man and probably have more important stuff to do, but if you don't ask you don't get Would there be any chance of having a Matchers Screen that only adjust's for different distance's using Jim's universal adjustments ???
__________________
"To me, The Match Up supercedes everything" Last edited by Charlie D; 08-23-2008 at 01:12 PM. |
|
|
|
|
#8 |
|
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 9,264
|
Charlie,
I agree - asking is the prelude to answering! Again, as I stated in the above paragraph 1, and I agree with your observation, 6f to 5f gets no F1 adjustment, while 5.5f does, and for the reasons I speculate on in paragraph 2. There are plenty of other ways to equalize times to today's distance, including using turn-back times from longer races. In the future, I don't see why not a more Match Up (Bradshaw) method of creating POR times for today's distance could not also be employed. I may leave that to Richie's initiative, along with other Match Up related tools. Hope that was a useful answer. Ted
__________________
RDSS - Racing Decision Support System™ |
|
|
|
|
#9 |
|
Match Up Apprentice
Join Date: May 2008
Posts: 2,105
|
Thanks Ted
I'm think a screen using Jim's adjustments could be a good addition and may also be of help to those wanting to learn the the Match Up
__________________
"To me, The Match Up supercedes everything" |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sunday Stakes Woodbine Bold Venture | shoeless | Classic Sartin Programs - Support, Discussion | 46 | 07-21-2008 08:09 AM |
|