RDSS Testing: Bug Reports - Page 5 - Pace and Cap

tompkins · 03-08-2007, 10:21 PM

Quote:

Originally Posted by Ted Craven

Software crashes when opening races over 12 furlongs. Workaround: don't open races over 12 furlongs

Ted

In speculator, one can just change the distance to 10 furlongs. Works well.

Ted Craven · 03-09-2007, 08:44 AM

Quote:

Originally Posted by tompkins

In speculator, one can just change the distance to 10 furlongs. Works well.

I will add that 'change distance' feature to RDSS. (Software still should not crash...)

Ted

racer100 · 03-09-2007, 07:12 PM

Ted,
I don't know if anyone is having this issue but under WinXP Pro SP2 after I analyze a race when I click to analyze another race, RDSS unloads itself and I have to restart it again. It saves the race that I have analyzed so no issue with that. On my laptop where I run Vista since it came with it (ouch!) it works fine. I think this may be a memory allocation issue by RDSS but not sure. I have 1GB DDRAM on my WinXP Pro machine and have no issues whatsoever with other programs. The machine runs usually with 500MB of free ram before RDSS is loaded up and looking at the windows manager I see that RDSS takes about 135KB of RAM to run..Maybe more information than you need but hopefully it will be helpful..I was never able to analyze 2 races sequentially without RDSS not quitting on me after the first race analyzed. Thanks for the great work on RDSS!

RichieP · 03-10-2007, 10:15 AM

the race description is off Ted. The 8th is for the ladies while the 9th is for the boys

screenshot

Ted Craven · 03-10-2007, 12:03 PM

Re race description on the Card Summary screen, Sex Restrictions are incorrect: noted and thanks! The actual textual Conditions on the race screen is correct.

Fixed for the next version.

Ted

tom kalies · 03-13-2007, 06:17 PM

ted

this screen shot happens on both systems xp & vista, both with 1.5gb ram, when switching back and forth between races on the same card.

It happens when i'm connected to bris wagering, or just doing races inrdss.

I don'y lose any data, you just haveto keep restarting the program

Ted Craven · 03-13-2007, 06:32 PM

Quote:

Originally Posted by tom kalies

ted

this screen shot happens on both systems xp & vista, both with 1.5gb ram, when switching back and forth between races on the same card.

It happens when i'm connected to bris wagering, or just doing races inrdss.

I don'y lose any data, you just haveto keep restarting the program

Tom, yep, that's a good example of Bug #1 (see the bug list), the part about switching between races on the same card. Again, sorry, you should close the card, then open to the new race. This is nearly fixed, but I'll release another update with smaller stuff first, (in the next day or so). Then that one. Please bear with...

(BTW, hope you had a piece of that race, nice $20 mutuel

)

Thanks,

Ted

Bill Lyster · 03-14-2007, 08:41 PM

Ted:
1. For comparison purposes on the "Analysis-Original" screen is it possible to show the data for horses that will need to be either extracted or projected. Perhaps a split screen below the raw data that shows the extracted and/or projected time at today's distance?

2. I suppose one could even go further and adjust each raw data line for distance (much like the 'pacelines' upper screen in spec 160, but without any other adjustments). In keeping with Matchup guidelines the adjustments would be at 6-2/5ths per half furlong. This conceptually might add a screen between the "raw" and "adjusted" panels, but it would close the visual gap for those MATCHING the raw pacelines.

Bill

Ted Craven · 03-15-2007, 08:31 AM

Quote:

Originally Posted by Bill Lyster

Ted:
1. For comparison purposes on the "Analysis-Original" screen is it possible to show the data for horses that will need to be either extracted or projected. Perhaps a split screen below the raw data that shows the extracted and/or projected time at today's distance?

2. I suppose one could even go further and adjust each raw data line for distance (much like the 'pacelines' upper screen in spec 160, but without any other adjustments). In keeping with Matchup guidelines the adjustments would be at 6-2/5ths per half furlong. This conceptually might add a screen between the "raw" and "adjusted" panels, but it would close the visual gap for those MATCHING the raw pacelines.

Bill

Bill, I replied in the RDSS Questions a & Answers Forum here since this is more of a 'feature suggestion' than a bug.

Ted

Bill Lyster · 03-19-2007, 01:44 AM

New edition comments:
note that first time starters show no works and that the screen that appears is not formatted the same as for workouts included for other runners.

03-10-2007, 10:15 AM	#44
RichieP Grade 1 Join Date: Jun 2005 Posts: 7,019	the race description is off Ted. The 8th is for the ladies while the 9th is for the boys screenshot Attached Images __________________ "Grampy I'm talking to you!"

03-10-2007, 12:03 PM	#45
Ted Craven Grade 1 Join Date: Jun 2005 Location: Nanaimo, British Columbia, Canada Posts: 9,255	Re race description on the Card Summary screen, Sex Restrictions are incorrect: noted and thanks! The actual textual Conditions on the race screen is correct. Fixed for the next version. Ted __________________ RDSS - Racing Decision Support System™

03-13-2007, 06:17 PM	#46
tom kalies Grade 3 Join Date: Jun 2005 Posts: 54	error report ted this screen shot happens on both systems xp & vista, both with 1.5gb ram, when switching back and forth between races on the same card. It happens when i'm connected to bris wagering, or just doing races inrdss. I don'y lose any data, you just haveto keep restarting the program Attached Images

03-14-2007, 08:41 PM	#48
Bill Lyster Grade 1 Join Date: Feb 2006 Location: Escondido CA just 25 minutes from where the turf meets the surf - "...at Del Mar" Posts: 2,500	Projected and extracted raw times Ted: 1. For comparison purposes on the "Analysis-Original" screen is it possible to show the data for horses that will need to be either extracted or projected. Perhaps a split screen below the raw data that shows the extracted and/or projected time at today's distance? 2. I suppose one could even go further and adjust each raw data line for distance (much like the 'pacelines' upper screen in spec 160, but without any other adjustments). In keeping with Matchup guidelines the adjustments would be at 6-2/5ths per half furlong. This conceptually might add a screen between the "raw" and "adjusted" panels, but it would close the visual gap for those MATCHING the raw pacelines. Bill

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Welcome to the RDSS Forum!	Ted Craven	RDSS	0	11-02-2006 09:14 PM

03-09-2007, 07:12 PM	#43
racer100 Grade 3 Join Date: Feb 2007 Posts: 61	Ted, I don't know if anyone is having this issue but under WinXP Pro SP2 after I analyze a race when I click to analyze another race, RDSS unloads itself and I have to restart it again. It saves the race that I have analyzed so no issue with that. On my laptop where I run Vista since it came with it (ouch!) it works fine. I think this may be a memory allocation issue by RDSS but not sure. I have 1GB DDRAM on my WinXP Pro machine and have no issues whatsoever with other programs. The machine runs usually with 500MB of free ram before RDSS is loaded up and looking at the windows manager I see that RDSS takes about 135KB of RAM to run..Maybe more information than you need but hopefully it will be helpful..I was never able to analyze 2 races sequentially without RDSS not quitting on me after the first race analyzed. Thanks for the great work on RDSS!

03-19-2007, 01:44 AM	#50
Bill Lyster Grade 1 Join Date: Feb 2006 Location: Escondido CA just 25 minutes from where the turf meets the surf - "...at Del Mar" Posts: 2,500	New edition comments: note that first time starters show no works and that the screen that appears is not formatted the same as for workouts included for other runners.